(as of Sep 20,2020 09:16:17 UTC – Details)
4 Ways To Unlock
Help you to enjoy keyless access home
Scramble Code Function Ensure Safe
Input any random code before or after the correct passcode, to prevent on-lookers and spreading your fingerprint marks, this feature makes your doorlock that much more secured.
Private Mode To Passage Mode
Unlock the door lock
Unlocking with fingerprint, password, IC card or bluetooth.
Enter“123#”in 5 seconds
After sccessfuly unlocking , enter“123#”in 5 seconds, before the lock is automatically turned off, and then it prompts”the operation is successful”.
Directly turnthe handle freely
When the passage mode is activated, the user can directly turn the handle and unlockthe door without fingerprint, password, IC card or Bluetooth.
Note：Open the lock by the fingerprint, IC card, password or app once, status will be switched to private mode.
Grant Accress To Your Home Even When You Are Away
Share E-keys and Codes and select how long you want them to be valid for without worrying about lost of the keys. The control is totally in your hand by time setting.
1. Install the latch
Install single latch, and cut insulating sleeves according to door thickness.
The length of insulating sleeve should be 8mm less than door thickness.
2. Adjust the triangle position
Turn the Triangle ” △ ” on Front Handle to position “S” .
3. Install connecting screws
Choose and install connecting screws in front handle according to door thickness, and put insulating sleeves upon
connecting screws, and insert square bar into front handle.
Door Thickness： 35~50mm | 50~65mm
Square Bar： 70mm | 80mm
Connecting Screws：50~65mm | 75mm 85mm
4. Install front handle
Insert front handle into latch.
5. Install rear handle
Push the rear handle center button to remove the battery cover. Then connect with the front handle by
connectingscrew, make sure the secure lock button is downwards.
6. Screw the inner hex nuts by allen wrench. (Inner hex nuts is inside of rear handle)
Note: Take turns screwing two connecting screws to avoid that one side of screw is too tight and the other side
of screw is too loose.
7.Insert 4 AA batteries according to positive and negative pole.
8.Press the cover centre button and install it.