HHOOMMEE Electronic Automatic Sensor Touchless Bathroom Sink Faucet, Motion Activated Hands-Free Vessel Sink Tap, Easy Installation, Lead Free Certified, Chrome Finished, Model AT0101X

Add your review

$66.11

$66.11

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: $66.11
(as of Sep 13,2020 03:16:24 UTC – Details)


Product Description

HHOOMMEE Sanitary WareHHOOMMEE Sanitary Ware

Bathroom Sensor Faucet

Bathroom Sensor FaucetBathroom Sensor Faucet

HHOOMMEE Automatic Touchless Sensor Faucet Motion Activated Bathroom Hands Free Tap (Chrome)

Sensor Faucet Features:

Water saving:water out automatically when you put your hands under the induction zone,water stops when put your hands back.
Hygienic:hands free, avoid infection-cross by touching faucet.
Hands free:micro-computer control.
Soft touch:the aerator with technology of air in water,make water been soft touched and no splash.
Energy saving:battery power,4AA alikaline batteries, can be used for around 2 years.

Faucet SizeFaucet Size

Automatic Faucet Parameters

Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family use
Sensoring Distance(factory setting):15cm
Deck Hole Diameter:20-30mm
Deck Thickness:20-45mm
Deck Plate Length:6.1inch
Flow Rate:8L/Min
Cartridge Lifecycle:500,000 Times
Water Pressure:0.05-0.7Mpa
Switching Time:less than 0.7s
Low Battery Indicator:Red Led Flash

Sesnor Faucet Details

Infrared Sensor

Infrared Sensor

Faucet Aerator

Faucet Aerator

Faucet and Deck Plate

Faucet and Deck Plate

Mounting Hole

Mounting Hole

Infrared Sesnor

Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop.

This motion sensor faucet will make your washing cleaning and convenient.

Faucet Aerator

The faucet aerator with soft water flow,no splash,water saving.

Maximum lime resistance
No need to disassemble the aerator for cleaning
Perfect stream quality
Very low noise level
Damage proof

Faucet and Deck Plate

Faucet is made of solid brass with chrome plating.

It comes with a deck plate.

Plate length is 6.1 inch. It is suitable for single hole basin. If your are using an 8 inch 3 hole basin. You have to prepare another longer plate in advance.

Mounting Hole

It’s a single hole basin faucet.

Part 1 and 3 faucet stem length is 47mm. The suitable deck thickness is 25–45mm.

Part 2 stem diameter is 20mm. Suitble deck hole is 20mm-30mm.

Faucet PartsFaucet Parts

Package Content

Sensor faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included:

1x faucet body with deck plate (cover deck holes)
1x control box
1x water mixer valve,brass with check valve
2x 1/2-9/16 water supply pipe, with red and blue mark(red one for cold water, blue one for cold water)
1x 1/2-1/2 water pipe (for mixing water)
4x mounting screws (fix control box on the wall)
1x instruction paper

Faucet and Control Box Installation

Water Mixer Valve

Water Mixer Valve

Control Box

Control Box

Faucet Installation

Faucet Installation

Water Mixer Valve

This is a brass water mixing valve. Two inlet G1/2″(DN15) male thread, one for cold water and one for hot water, with blue and red mark inside One outlet for mixing valve, G1/2″(DN15) female thread.

There’s check valve inside the two inlets to prevent water flow back because of water pressure imbalance.

Control Box Connection

The core valve of the control box is the solenoid valve. The lifecycle of it is 500,000 time on and off.

On the top there’s the battery case which requires 4AA alikaline battery(not included).

Battery can be bought in your local store.

Water mixer valve should be connect to the inlet of control box.

Note: Special attention should be paid to the connection of part 1 and part 2. Don’t install it backwards

Faucet Installation

Install faucet on the basin
Fix control box on the wall
Connect mixer valve outlet to control box inlet
Connect faucet and control box outlet with flexible pipe
Sensor signal wire connection
Cold water pipe connect to mixer valve inlet(mark blue)
Hot water pipe connect to mixer valve inlet(mark red)

Copper
Made in USA or Imported
SIMPLY & CONVENIENCE OPERATION: Sensor powered by 4pcs AA Batteries; When sensor is activated, automatically supplies water as soon as hands are within sensing range, and stops when you move away your hands;
WATER-SAVING: Water efficient faucet reduces overall water usage without sacrificing water pressure;
ENERGY-SAVING: Sensor tap, Sensor powered by 4pcs AA Batteries (NOT included). Safe to be used in bathroom.
Touchless design provides hands-free ;
DURABLE: Chrome finished Solid brass construction for reliability and long lasting performance;

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “HHOOMMEE Electronic Automatic Sensor Touchless Bathroom Sink Faucet, Motion Activated Hands-Free Vessel Sink Tap, Easy Installation, Lead Free Certified, Chrome Finished, Model AT0101X”

Your email address will not be published. Required fields are marked *

HHOOMMEE Electronic Automatic Sensor Touchless Bathroom Sink Faucet, Motion Activated Hands-Free Vessel Sink Tap, Easy Installation, Lead Free Certified, Chrome Finished, Model AT0101X

$66.11

Top 20
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0